TM 10-5410-224-14
(b) Separate seal (17) and rear plate (20)
(8) Removal and replacement of closure
from front plate (16).
assembly (figure 6-2). To remove and replace
(c) Using new seal (17), reassemble closure
closure assembly (12) and associated parts, proceed
assembly (12) and secure with screw (15).
as follows:
(d) Insert closure assembly (12) into ECU
(a) Remove closure assembly (12) from holes
panel (31).
in ECU panel (31) and disassemble by removing
screw (15).
23. Ring (2)
16. Plate
9.
Rivet (10)
1. Screw (2)
24. Rivet (4)
17. Seal
Hinge
10.
2. Washer (2)
25. Rivet (8)
18. Rivet (2)
Rivet (4)
11.
3. Washer (2)
26. Spacer (2)
19. Nut
12.
Closure assembly (4)
4. Nut (2)
27. Screw (2)
20. Plate
13.
Rivet
5. Sleeve (2)
28. Plate (2)
21. Sleeve (4)
14.
Lanyard
6. Cable (2)
29. Nut (2)
22. Rivet (4)
15.
Screw
7. Rivet (7)
30. Panel
8. Panel assembly
