TM 10-5410-224-14
REPAIR OF CENTER STRUCTURE ROOF PANEL
plate (fig. 9-1). To remove and replace handle and
9-1. Description.
plate (8), proceed as follows:
The description of the center structure roof panel
(a) Remove four rivets (7) to detach handle
is contained in paragraph 3-22.
and plate (8).
9-2. Cleaning.
NOTE
Refer to paragraph 4-7 for rivet removal and
Use a clean, soft bristle brush to remove dust,
replacement procedures.
dirt, and lint from all parts and surfaces of the
(b) Replace handle and plate (8) by
roof panel. Wash roof with soap and water, and a
securing to center structure roof panel (16) using
sponge or soft cloth.
four rivets (7).
9-3. Inspection and Repair.
(2) Removal and replacement of scuff plate
a. Inspection. Inspection of the center structure
roof panel is accomplished by performing the
proceed as follows:
following procedure:
(a) Remove four rivets (10) to detach scuff
(1) Perform inspection procedure of paragraph
plate (11).
NOTE
(2) Check handle and plate, and drop pad at
Refer to paragraph 4-7 for rivet removal and
top of roof for security of attachment and damage.
replacement procedures.
b. Repair. If the center structure roof panel
(b) Replace scuff plate (11) by securing to
has minor structural damage, repair the panel in
center structure roof panel (16) by using four rivets
accordance with procedures given in paragraph 3-
(10).
(3) Removal and replacement of inserts (fig. 9-
panel is damaged, remove and replace the damaged
part as follows:
follow instructions given in paragraph 4-8.
(1) Removal and replacement of handle and
