TM 10-5410-224-14
(a) Remove screw (5), washer (4) and two
(5) Removal and replacement of support
nuts (3) to detach lanyard assembly (6).
assembly (fig. 9-2 ). To remove and replace support
(b) Remove quick release pin (7) from
assembly (20 or 9), proceed as follows:
bracket (8).
(a) Remove two screws (1), lock washers (2),
(c) Remove four rivets (1) to detach bracket -
and flat washers (3) to detach support assembly
(9).
(20 or 9).
(d) Replace bracket (9) by securing to center
(b) Replace support assembly (20 or 9) by
structure roof panel using four rivets (1).
securing to center structure roof panel using two
(e) Attach bracket (8) and lanyard assembly
screws (1), lock washers (2), and flat washers (3).
(6) to bracket (9) using screw (5), washer (4), and
(6) Removal and replacement of ceiling light
two nuts (3).
retainer assembly (fig. 9-3 ). To remove and replace
NOTE
ceiling light retainer assembly (2), proceed as
Refer to paragraph 4-7 for rivet removed and
follows:
replacement procedures.
6. Lanyard assembly
1. Rivet (4)
7. Pin
2. Retainer assembly
8. Bracket
3. Nut (2)
9. Bracket
4. Washer
5. Screw
