TM 10-5410-224-14
4-14. Foldout Roof Panels.
(5) Disconnect safety cables (fig. 3-6) from
a. Removal. To remove the foldout roof panels
toldout floor panel.
from the expandable shelter, perform the following
(6) Carefully remove hinged floor panel from
procedure:
expandable shelter.
b. Installation. To install the foldout floor panel
(1) Perform preliminary procedure of
on expandable shelter, perform the following
procedure:
(2) Inside shelter, release two latches (4, fig.
(1) Carefully place the foldout floor panel in
removed) to each swingout wall and release six
expandable shelter so that its hinge half aligns
with the hinge half on center structure floor panel.
latches (16, fig. 4-3) securing foldout roof panel to
(2) Support foldout floor panel and insert
foldout end wall.
hinge pin (1, fig. 3-5) into hinge.
(3) Connect safety cables (fig. 3-6) to foldout
Have at least four men support hinged roof
floor panel.
panel in the following step.
(4) Swing swingout walls outward to full
(3) Fold in swingout walls and foldout end
deployed position. Secure swingout walls to foldout
wall then lower foldout roof panel.
floor panel using four latches (4, figure 4-2)
(4) Remove hinge pin (1, figure 4-6) from
provided.
hinge connected between foldout roof panel and
(5) Install foldout end wall on expandable
center structure roof panel.
shelter in accordance with installation procedure of
(5) Carefully remove foldout roof panel from
expandable shelter.
4-10
