TM 10-5410-224-14
8. Latch (3)
1. Rivet (4)
9. Rivet (84)
2. Pad (2)
10. Strip
3. Rivet (16)
11. Strip (2)
4. Latch (4)
12. Seal
5. Rivet (73)
13. Insert (12)
6. Pan (4)
14. Panel
7. Pan (3)
hinge (9, figure 4-4) connected between fixed end
(4) Using roof support struts, raise and
panel of center structure and swingout wall by
support roof about two inches for clearance.
drilling out rivets and removing screws from
(5) Release three latches (8, fig. 4-2) securing
swingout wall.
swingout wall panel (to be removed) to foldout end
(7) Carefully remove the swingout wall from
wall and release two latches (4) securing swingout
the expandable shelter.
wall to foldout floor panel.
(6) Support swingout wall and remove from
