TM 10-5410-224-14
(2) Wipe insert with solvent.
(4) Wipe away excess potting compound. Do not
allow potting compound to get into the insert.
(3) Use header fastener (see Appendix D, Section
111) to install and secure insert in hole (see figure 4-1).
(1) Coat edges of insert with sealant, RTV 732.
d. Installation of BN527 Series Inserts. Install
(2) Use header fastener (see Appendix D, Section
the new insert as follows:
III) to install and secure insert in hole (see figure 4-1).
NOTE
It is important that the edges of the insert
be sealed with sealant, RTV 732.
Change 1 4-3
