TM 9-2330-390-14&P
4-78. STEERING LINK REPLACEMENT (Con't).
2.
Install new grease fitting (5) on steering link (4).
3.
Install steering link (4) on front axle (1) with notch
in end of center pin (2) alined with square portion
of axle weldment (9). Install new roll pin (6)
through center pin.
4.
Secure steering link (4) in locked position with
steering locking pin (3).
Follow-on Tasks:
Lubricate steering link (see Lubrication Instructions, Chapter 3, Section I).
Install tie-rod assemblies (see paragraph 4-77).
Install front drawbar (see paragraph 4-63).
4-208