TM 9-2330-390-14&P
4-80. FRONT DOLLY PIVOTING TRAY REPLACEMENT (Con’t).
NOTE
Perform steps 6 and 7 lf components are
damaged or if replacing pivoting tray.
6.
Remove data plate (see paragraph 4-105).
7.
Remove pivoting tray lockout brace and upper
bracket (see paragraph 4-98).
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective
goggles and gloves, and use only In a well-ventilated area. Avoid contact with skin,
eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame or
excessive heat. The solvent’s flash point is 100°F-138°F (38°C-59°C). If you
become dizzy while using cleaning solvent, immediately get fresh air and medical help.
If solvent contacts eyes, immediately wash your eyes and seek medical attention.
1.
Clean all components with dry cleaning solvent and allow to dry.
2.
Inspect all components for damage. Replace damaged components.
1.
If removed, install pivoting tray upper bracket and lockout brace (see paragraph 4-98).
2.
If removed, install data plate (see paragraph 4-105).
4-213
