TM 9-2330-390-14&P
4-77. TIE-ROD ASSEMBLY MAINTENANCE (Con’t).
1. Perform front axle alinement check (see para-
graph 4-55).
2. If alinement is OK, loosen jamnuts (12 and 14).
3. If alinement is not OK, loosen jamnuts (12 and
Apply sealing compound to threads of jamnuts
and tie-rod ends (7 and 8). Tighten jamnuts and
apply torque of 140 lb.-ft. (190 N•m).
14). Adjust jamnut position on tie-rod ends (7 and
8) as required. Repeat steps 1 and 2.
• Remove steering locking pin from steering link.
• Lubricate tie-rod ends (see Lubrication Instructions, Chapter 3, Section I).
4-205
