TM 9-2330-390-14&P4-77. TIE-ROD ASSEMBLY MAINTENANCE (Con't).NOTENote number of threads showing on each tie-rod end to aid during assembly.3. Remove tie-rod ends (7 and 8) and jamnuts (12 and 14) from tie-rod (13).Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protectivegoggles and gloves, and use only in a well-ventilated area. Avoid contact with skin,eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame orexcessive heat. The solvent’s flash point is 100°F-138°F (38°C-59°C). If youbecome dizzy while using cleaning solvent, lmmediately get fresh air and medical help.It solvent contacts eyes, immediately wash your eyes and seek medical attention.1. Clean all metal components with dry cleaning solvent and dry with a clean rag.2. Inspect tie-rod for bends, cracks, and damaged threads. Replace damaged tie-rod.3. Inspect tie-rod ends for cracks, excessive looseness or play, wear, and damaged threads. Replace damagedtie-rod ends.4-203
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business