TM 9-2330-390-14&P
4-198 Change 2
4-76.
WHEEL AND TIRE MAINTENANCE (Con't).
2.
Loosen ten wheel nuts (3).
NOTE
Dolly set hydraulic control valve may be operated to raise wheel and tire off ground
(see paragraph 2-21).
3.
Raise dolly set until wheel and tire (2) are off ground. Support with a trestle.
4.
Remove ten wheel nuts (3) and wheel and tire (2) from studs (1).
WARNING
•
NEVER reinflate a tire that has been run flat or seriously underinflated without
first removing and repairing the tire and/or rim. Failure to follow this warning
may result in serious injury or death to personnel.
•
Before removing tire for service and disassembly of rim components, ensure
that tire is COMPLETELY deflated by removing valve stem. Failure to follow this
warning may result in serious injury or death to personnel.
Refer to TM 9-2610-200-14 for instructions on dismounting tire from wheel and repairing tube.
b.
REPAIR
