TM 9-2330-275-14&P
4-53. TOOLBOX AND PLATFORM MAINTENANCE (M832 SN J089-001 THRU 159 AND
J017-160 THRU 350 ONLY) (Con’t).
11.
12.
Remove two nuts (42), Iockwashers (41), washers (40), and eyebolts (27) from storage box (44). Discard
Iockwashers.
Scrape pad or fasteners from cover (23).
WARNING
13.
14.
15.
16.
17.
18.
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective
goggles and gloves, and use only in a well-ventilated area. Avoid contact with skin,
eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open llama or
excessive heat. The solvent’s flashpoint is 100°F-1380F (38°C-59°C). If you become
dizzy while using dry cleaning solvent, immediately get fresh air and medical help. If
solvent contacts your eyes, Immediately wash them and get medical aid.
Remove any residue from rover (23) with dry cleaning solvent.
Remove two screws (28) from two leg assemblies (29) and remove leg assemblies (29) from platform
assembly (11).
Remove 12 screws (39), two guides (36) and guides (38), 12 self-looking nuts (37), and two latch sets (35)
from platform assembly (11).
Remove cotter pin (32) from pin (33), and remove pin (33) and two washers (34) from hinge leaf (31). Discard
cotter pin.
Remove hinge leaf (31) from platform assembly (11).
Remove spring pin (30) from connector link (2), and remove connector link (2) from hinge leaf (31). Discard
spring pin.
c.
ASSEMBLY ]
1.
Install connector link (2) on hinge leaf (31) and install new spring pin (30) in connector link (2).
2.
Install hinge leaf (31) on platform assembly (11) with pin (33) and two washers (34), and secure pin (33) with
new cotter pin (32).
3.
Install two guides (36), guides (38), and latch sets (35) and 12 screws (39) and self-locking nuts (37) on
platform assembly (11).
4.
Install two leg assemblies (29) and screws (28) on platform assembly (11).
WARNING
Adhesive causes immediate bonding on contact with eyes, skin, or clothing and also
gives off harmful vapors. Wear protective goggles, and use adhesive in a well-
ventilated area. If adhesive gets in your eyes, try to keep them open, flush them with
water for 15 minutes, and get medical attention. Adhesives and sealing compounds
can burn easily and can give off harmful vapors. To avoid injury, keep adhesives and
sealing compounds away from open fire and use them In a well-ventilated area.
4-139
