TM 9-2330-275-14&P
4-53. TOOLBOX AND PLATFORM MAINTENANCE (M832 SN J089-001 THRU 159 AND
J017-160 THRU 350 ONLY) (Con’t).
2.
Remove 15 screws (14) and Iockwashers (13) from hinge (10). Discard Iockwashers.
3.
Remove platform assembly (11) from dolly set and place on bench for further disassembly.
4.
Remove screw (4) and wire rope assembly (5) from clevis (1).
b..
DISASSEMBLY
1.
Chisel heads off 15 rivets (15) and use a drive pin punch to remove rivets (15) from holes. Discard rivets.
2.
Remove hinge (10) from platform assembly (11).
3.
Remove nine screws (6) and self-locking nuts (12) from hinge (8), and remove cover assembly (9) from
platform assembly (11). Discard self-locking nuts.
4.
Chisel heads off nine rivets (7) and use a drive pin punch to remove rivets (7) from holes. Discard rivets.
5.
Remove hinge (8) from cover assembly (9).
4-137
