TM 9-2330-275-14&P4-53. TOOLBOX AND PLATFORM MAINTENANCE (M832 SN J089-001 THRU 159 ANDJ017-160 THRU 350 ONLY) (Con’t).NOTEBe sure surface of cover is free of burrs and sharp edges before applying newpad or fasteners.5.Install pad on cover (23) fasteners. Pad requires adhesive. Fasteners have peel-off backing.6.Install two nuts (42), new lockwashers (41), washers (40), and eyebolts (27) on storage box (44).7.Install toolbox prop (26) on two eyebolts (27).8.Install four screws (22) and nuts (17) and cover (23) on cover assembly (9).9.Install two screws (24) and new self-locking nuts (16) and eye bracket (25) on cover assembly (9).WARNINGAdhesive causes Immediate bonding on contact with eyes, skin, or clothing and alsogives off harmful vapors. Wear protective goggles, and use adhesive in a well-ventilated area. If adhesive gets in your eyes, try to keep them open, flush them withwater for 15 minutes, and get medical attention. Adhesives and sealing compoundscan bum easily and can give off harmful vapors. To avoid injury, keep adhesives andsealing compounds away from open fire and use them in a well-ventilated area.10.Apply adhesive to groove in platform assembly (11), and install new seal (43) on platform assembly (11).4-140
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
