TM 9-2330-275-14&P
4-53. TOOLBOX AND PLATFORM MAINTENANCE (M832 SN J089-001 THRU 159 AND
J017-160 THRU 350 ONLY) (Con’t).
6.
7.
8.
9.
10.
Remove six screws (18) and nuts (21), two catch strikes (20), and
four shims (19) from cover assembly (9).
WARNING
Dry cleaning solvent, P-D-880, is toxic
and flammable. Always wear protective
goggles and gloves, and use only in a
well-ventilatad area. Avoid contact with
skin, eyes, and clothes, and DO NOT
breathe vapors.
DO NOT use near
open flame or excesssive heat. The
solvent’s flash point is 100°F-138°F
(38°-59°C). If you become dizzy while
using drycleaning solvent, Immediately
get fresh air and medical help. If solvent
contacts your eyes, immediately wash
them and get medical aid.
Remove two screws (24) and self-locking nuts (16) and eye bracket (25) from cover assembly (9).
self-locking nuts.
Remove four nuts (17) and screws (22) and cover (23) from cover assembly (9).
Remove seal (43) from groove in platform assembly (11). Use dry cleaning solvent to remove any
Discard seal.
Remove toolbox prop (26) from two eyebolts (27).
Discard
residue.
4-138
