TM 9-2330-275-14&P
4-51. TOOLBOX AND STEP PLATE MAINTENANCE (M840) (Con’t).
5.
Remove two rubber strips (17) and two rubber strips (20) from toolbox (1).
6.
Remove four rivets (23) and two clamping catches (24). Discard rivets.
7.
Remove two rivets (22) and data plate (21). Discard rivets.
1.
Install data plate (21) to toolbox (1) with two new rivets (22).
2.
Install two damping catches (24) with four new rivets (23).
3.
Install two rubber strips (20) and two rubber strips (17) to toolbox (1) using adhesive.
4.
Install two catches (9) to door (11) with four new rivets (10).
5.
Install three data plates (15) with 12 new rivets (16).
4-132
