TM 10-5411-224-14
TABLE 3-1. OPERATOR TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. AIR OR MOISTURE IS GETTING INTO SHELTER.
Step 1. Inspect LMS exterior.
If any punctures or tears or damage are found that interrupt the integrity of the shelter, notify your
supervisor.
2. PERSONNEL DOOR DIFFICULT TO CLOSE.
Step 1. Inspect personnel door for loose or missing hardware.
Notify your supervisor if door has loose or missing hardware.
Step 2. Inspect all parts that rotate or slide for adequate lubrication.
Lubricate as required (Appendix G).
3. PANEL WALLS, FLOOR, OR CEILING IS DAMAGED.
Step 1. Inspect LMS interior.
If any water intrusion is detected, notify your supervisor. Superficial damage may be repainted in
accordance with paragraph 3-7, Touch-up Painting.
Interior damage that interrupts the structural integrity must be reported to your supervisor.
4. PERSONNEL DOOR IS DAMAGED.
Step 1. Inspect personnel door assembly interior and exterior for damage.
If dents or punctures are noted, notify your supervisor. Superficial damage may be repainted in
accordance with paragraph 3-7, Touch-up Painting.
5. DOOR ASSEMBLY DOES NOT CLOSE TIGHTLY.
Step 1. Inspect RFI/EMI and environmental gaskets for damage.
Notify your supervisor if gasket is damaged.
3-2
