TM 10-5411-224-14
(6)
On the bottom of the shelter, remove all paint and sealer from any rivet head that may come in contact
with the rear mounting adapter (28).
(7)
Insert an isolator mounting screw (17), flat washer (18), and isolator mount washers (19) down through
each round opening in the rear mounting adapter (28).
(8)
Position and secure rear mounting adapter (28) to shelter using screws (20, 21, 22, and 23), flat washers
(24 and 25), and lockwashers (26 and 27). Do not tighten.
(9)
Repeat steps 1 through 8 for other side of shelter.
Figure 4-1. Rear Bracket Mounting Assembly
CHANGE 1 4-3
