TM 10-5411-203-13
2-5. REMOVAL PROCEDURES
a. Removal of Complexing Kit Passageway - Type I (ISO Shelter to ISO Shelter)
(1)
Remove bump thru doors using the following steps:
(a) Using flat-tip screwdriver, unthread captive screws on pedestal assembly (1) at bottom of door (2).
(b) Remove door (2) and pedestal (1) from frame (3) of Complexing kit passageway.
(c) Store door and pedestal in storage container.
(e) Repeat (a) thru (c) above for other door.
2-35
