TM 10-5411-203-13
2-5. REMOVAL PROCEDURES (CONT)
a. Removal of Complexing Kit Passageway - Type I (ISO Shelter to ISO Shelter) (Cont)
WARNING
The Complexing Kit Passageway components include two ramps and a
stairway. The ramps weigh approximately 145 pounds (65.77 kg) and
195 pounds (88.45 kg) respectively, and the stairs (complete assembly)
weighs ap- proximately 70 pounds (31,75 kg). Four per- sons are
required to handle each of these components. Attempting to lift or carry
one of these components by yourself may result in serious injury or
damage to equipment.
NOTE
The following procedures require two persons in each ISO shelter.
(2)
Remove ramp (1) from inside Complexing Kit Passageway - Type I (2) using the following steps:
(a) Lift ramp (1) and place it on its side.
CAUTION
Do not step an fabric floor of connector assembly. Damage to connector
assembly may result.
(b) Lift ramp (1) and pass it through to personnel in other ISO shelter (3).
(c) Remove ramp (1) from ISO shelter (3).
2-38
