TM 10-5411-203-13
2-5. REMOVAL PROCEDURES (CONT)
a. Removal of Complexing Kit Passageway - Type I (ISO Shelter to ISO Shelter) (Cont)
NOTE
The next procedure requires two persons on the outside and one person
on the inside of the ISO shelter.
(6)
Replace sidewall or endwall closeout panels (1) and (2) on both ISO shelters using the following steps-
(a) Remove closeout panel from outside hinged endwall (2) of ISO shelter or retrieve panel from other storage
location.
(b) Place closeout panel into ISO shelter opening (3) and hold in place.
(c) Using wide flat-tip screwdriver, tighten 12 captive screws in closeout panel on ISO shelter.
(d) Repeat steps (a) through (c) for other ISO shelter's closeout panel.
2-41
