TM 10-5411-203-13
2-4. INSTALLATION AND PREPARATION FOR USE (CONT)
b. Installing Complexing Kit Passagewav - Type II, Class A and Class B (ISO Shelter to TEMPER) (Cont)
(23)
Secure weather barrier (1) to ISO shelter (2) using the following steps:
CAUTION
Do not step on fabric floor of connector assembly.
Damage to connector assembly may result.
(a) Unlatch all inside roof panel latches to release hinged roof panel (3) from ISO shelter (2).
(b) Pull locking pins (4) to allow roof support struts (5) to swing down from hinged roof panel (3).
(c) Extend inner tube (6) of roof support struts (5).
(d) Insert locking pins (4) through holes in roof support struts (5) and inner tubes (6) when holes align.
2-30
