AREA LIGHT ASSEMBLY TESTING AND REPAIR (cont)

AREA LIGHT ASSEMBLY TESTING AND REPAIR - TM-10-5411-201-14_100

AREA LIGHT ASSEMBLY TESTING AND REPAIR (cont) - TM-10-5411-201-14_102

TM-10-5411-201-14 Shelter Tactical Expandable One-Sided NSN 5411-01-124-1377 60 AMP Model NSN 5411-01-295-3433 100 AMP Model Manual
Page Navigation
82

TM 10-5411-201-14 T.O. 35E4-178-1 4-9. (cont) 7. 8. 9. Rotate screw on clamp (12) one-quarter turn, open clamp (12), and remove electrical cord (9). Drill out two rivets (11) and remove clamp (12) from exterior light post (10). (Refer to 4-33) Remove electrical cord (9) from exterior light post (10). 10. 11. 12. 13. Separate liquid tight connector (13) electrical cord (9). Remove three terminal lugs (15) from (9) . and connector (14) from three wires in electrical cord Remove two wing nuts (16), washers (17), and bolts (18) from exterior light post (10). Drill out four rivets (19) and remove two cord stowage brackets (20) from exterior light post (10). (Refer to paragraph 4-33) CLEANING, INSPECTION 1. Clean area light 2. Inspect mounting assembly and component surfaces. surfaces for corrosion and damage. 4-19

Privacy Statement
Press Release
Contact