TM 10-5411-201-14
T.O. 35E4-178-1
4 - 1 0 . ( c o n t )
10.
Remove two screws (30) and lockwashers (31) and separate outlet box (27) from wall.
11.
Loosen two insulating connectors (15) below light fixture adapter (9) and:
a. For units prior to S/N 1261, loosen insulating conduit connector (15) at elbow (28) and remove
conduit (14).
b. For units with S/N 1261 and subsequent, loosen insulating conduit connector (15) at switch box (27)
and remove conduit (14).
12.
Loosen screw (17) at rear of offset connector (18).
1
3 .
Remove two screws (19) and lockwashers (20) from light fixture adapter (9).
14.
Remove two screws (21) and lo&washers (22) from limit switch mounting plate (23).
15.
Lower light fixture adapter (9) and offset connector (18), together with limit switch (13) and limit switch
mounting plate (23) from upper conduit (24).
16.
Remove incandescent light spacer (25).
17. Separate light fixture adapter (9) from limit switch (13) and limit switch mounting plate (23) by
unscrewing close nipple (26).
4-24
CHANGE 8
