TM 10-5411-201-14
T.O. 35E4-178-1
12.
Pull wiring through conduit (14) and:
a. For units prior to S/N 1261, pull wiring through elbow connector (28) and into outlet box (27).
b. For units with S/N 1261 and subsequent, pull wiring into outlet box 27).
13.
Position lower conduit (14) into:
a. Elbow connector (28) (for units prior to S/N 1261) and tighten lower insulating connector (15).
b. Conduit outlet box (27) (for units with S/N 1261 and subsequent) and tighten lower insulating
connector (15).
14.
Position outlet box (27) against wall and secure with two screws (30) and lockwashers (31).
15.
Position switch (4) near outlet box (27) and connect wires. (Refer to paragraph 4-47.)
1
6 .
Position switch (4) in outlet box (27) and secure with two screws (3).
17.
Position switch cover (2) on switch (4) and secure with two screws (1).
18.
Position light fixture (8) near light fixture adapter (9) and connect wires. (Refer to paragraph 4-47.)
19.
Position light fixture (8) on light fixture adapter (9) and secure with one screw (7). Install bulb (29).
20.
Position light fixture cover (6) on light fixture (8) and secure with two screws (5).
4-26
CHANGE 8
