AREA LIGHT ASSEMBLY TESTING AND REPAIR

POWER ENTRY PANEL ASSEMBLY TESTING, REPLACEMENT, AND REPAIR (cont) - TM-10-5411-201-14_99

AREA LIGHT ASSEMBLY TESTING AND REPAIR (cont) - TM-10-5411-201-14_101

TM-10-5411-201-14 Shelter Tactical Expandable One-Sided NSN 5411-01-124-1377 60 AMP Model NSN 5411-01-295-3433 100 AMP Model Manual
Page Navigation
81

TM 10-5411-201-14 T.O. 35E4-178-1 4-9. AREA LIGHT ASSEMBLY TESTING AND REPAIR This task covers: a. Testing d. Repair b. Disassembly e. Assembly c. Cleaning, Inspection INITIAL SETUP Special Tools Personnel Hand blind riveter, Appendix B, Item 2 Electrician Test Equipment Sheet metal worker Multimeter, Appendix B, Item 4 Equipment Condition Standard Tools Area light assembly removed General mechanics tool kit (paragraph 3-4) All circuit breakers and switches in OFF position TESTING 1. Remove flood light (1) from lamp holder (2). 2. Unscrew two captive screws (3) and remove conduit outlet cover (4) and gasket (5) from exterior light post (6). 3. Using multimeter, check for continuity at lamp socket and wiring. 4. If no continuity is present, replace defective lamp or wiring. DISASSEMBLY 1. Unscrew flood light (1) from lamp holder (2). 2. Remove wing nut (3) and thumb screw (4) from lamp holder (2). 3. Unscrew two captive screws (5) and remove conduit outlet cover (6) and gasket (7). 4. Remove three wire nuts (8) and separate three wires in lamp holder (2) from three wires of electrical cord (9) in exterior light post (10) . 5. Separate lamp holder (2) from exterior light post (10). 6. Remove locknut (21). 4-18

Privacy Statement
Press Release
Contact