TM 9-4931-374-13&P
2-5. PREPARATION FOR MOVEMENT
a. Stowing of Miscellaneous Equipment.
(1) Store all hand tools in equipment storage chest, tool cabinet, or
table drawers.
WARNING
Injury to personnel may result if airhose is not bled.
(3) Rotate machinist's vise (4) located on left table (5) 90 degrees
clockwise to stowed position (jaws perpendicular to table) and
tighten.
(2) Disconnect compressed air source from quick-disconnect male
coupling assembly (1) on end of airhose. Then disconnect
(4) Remove sorting file (6) from wall shelving (7) and place on left
quick-disconnect female coupling assembly (2) of airhose from
table (5) with two straps (8).
quick-disconnect male coupling assembly (3) on exterior
shelter wall.
2-16
