TM 9-4931-374-13&P
(2) Lift the ECU (2) out of frame assembly (3) and place
temporarily to one side.
d. Preparation of ECU's for Operation.
WARNING
A minimum of four personnel is required when moving
or lifting the ECU's. (Each weighs approximately 270 lb
(122 kg).)
NOTE
There are two ECU's furnished with the shop set. The
following instructions pertain to only one ECU.
(3) Remove four screws (4) and four lockwashers (5) holding
frame assembly (3) to shelter floor.
(1) Remove two straps (1) holding ECU (2) in frame assembly (3).
2-11
