TM 9-2330-390-14&P
5-6.
HYDRAULIC CONTROL VALVE REPAIR (Con’t).
NOTE
l
Steps 1 through 4 are performed the same way for the positioning cylinders work
section and the lift cylinder work sections. Positioning cylinders work section is
illustrated.
l
All kit items and tie-rod set items should be discarded.
1.
Remove two cotter pins (3), clevis pins (7), and handle (2) from link (5) and spool end adapter (12).
2.
if damaged, remove knob (1) from handle (2).
3.
Remove cotter pin (4), clevis pin (6), and link (5) from clevis (10).
4.
If clevis (10) is damaged, remove two capscrews (11) and clevis from positioning cylinders work section (9).
Remove spool end adapter (12) from spool valve (8).
5-16
