TM 9-2330-390-14&P
5-7.
HYDRAULIC LIFT CYLINDER REPAIR (M1022A1 WITHOUT SIDE LIFT KIT) (Con't).
DO NOT damage machined surface of rod assembly when placing rod assembly in
vise.
6.
7.
Place rod end of rod assembly (7) in vise.
Remove locknut (1) piston (13) with assembled components, and preformed packing (2) from rod assembly
(7). Discard locknut and preformed packing.
8.
Remove head (6) with assembled components from rod assembly (7).
9.
Remove two wear rings (3 and 12) and seal (14) from piston (13). Discard wear rings and seal.
10.
Remove backup seal (10), rod seal (9), and rod wiper (8) from head (6). Discard backup seal, rod seal, and rod
wiper.
5-21