TM 9-2330-390-14&P
5-7.
HYDRAULIC LIFT CYLINDER REPAIR (M1022A1 WITHOUT SIDE LIFT KIT) (Cont).
5.
6.
Install new preformed packing (2) on rod assembly (7).
Assemble two new wear rings (3 and 12) and new seal (14) on piston (13). Position gaps of wear rings
approximately 180° opposite each other.
7.
Install piston (13) with assembled components on rod assembly (7).
8.
Install new locknut (1) on rod assembly (7) and tighten securely.
9.
Remove rod assembly (7) from vise. Install barrel assembly (4) in vise.
5-23