TM 9-2330-390-14&P
5-5.
SUSPENSION LINK REPLACEMENT (Con’t).
2.
3.
Remove cotter pin (8), flatwasher (7) clevis pin
(6), two bushings (9) and shock absorber (10)
from suspension link (1). Discard cotter pin.
If removing front or rear right side suspension link,
remove junction box bracket with associated
components (see paragraph 4-92 or 4-95).
4.
If removing front or rear left side suspension link,
remove hydraulic control valve bracket with asso-
ciated components (see paragraph 4-93 or 4-96).
5.
If removing a front suspension link, remove brace
(see paragraph 4-94).
6.
7.
Remove cap (14) and valve (15) from stud (18).
Remove two locknuts (13 and 16) and flatwashers
(12 and 17) from studs (11 and 18) at suspension
link mounting plate (19). Discard locknuts.
8.
Support suspension link (1) with a suitable lifting
device.
5-11
