TM9-2330-390-14&P
4-117. OIL COOLER AND ROCKER ARM COVERS REPLACEMENT.
This Task Covers:
a.
Removal
C.
Installation
b.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
· Starter switch assembly removed (see para-
graph 4-131).
Tools/Test Equipment:
· General mechanics tool kit (Item 30, Appendix G)
· Compressor unit (Item 4, Appendix G)
1.
Remove bolt (2) lifting hook (3), and oil cooler
cover (1) from rocker arm cover (4).
Materials/Parts:
· Dry cleaning solvent (Item 27, Appendix F)
· One gasket
General Safety Instructions:
· Dry cleaning solvent is flammable and must not be
used near an open flame. Use only in a well-venti-
lated area.
· Compressed air used for cleaning purposes should
never exceed 30 psl (207 kPa).
4-337