TM9-2330-390-14&P
4-116. FLYWHEEL ASSEMBLY AND STATOR ASSEMBLY REPLACEMENT (Con't).
2.
Ensure that end of crankshaft and tapered section of flywheel are free of grease. Clean all material from rotor
magnet with a clean rag.
3.
Inspect flywheel and ring gear for cracks, breaks, and broken fins or teeth. If teeth are broken or missing,
replace flywheel assembly.
4.
Inspect stator assembly for broken windings, burned condition, or broken leads. Replace damaged startor.
5.
Inspect grommet for damage. Replace damaged grommet.
1.
Install stator assembly (12) on crankcase (14) with four flange bolts (13).
2.
Feed stator assembly lead (11) through hole in crankcase (14) and install grommet (10).
3.
Secure stator assembly lead (11) to crankcase (14) with clamp (9).
4.
Connect two stator assembly connectors (7) to
wiring harness connectors (8).
4-335