TM 9-2330-390-14&P
4-330 Change 4
4-115. ENGINE REPLACEMENT (Con't).
1.
Install hydraulic pump on engine (see paragraph 4-107).
2.
If removed, install four isolator mounts (14) on pivoting tray (13) with eight capscrews (6), flatwashers (19),
and new locknuts (18).
WARNING
Use extreme caution when handling heavy parts. Lifting device is required when
parts weigh over 50 lb (23 kg) for a single person lift, over 100 lb (45 kg) for a two
person lift, and over 150 lb (68 kg) for a three or more person lift. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may
cause serious injury or death to personnel.
3.
Install engine (11) on two mounting plates (12) with four capscrews (15), flatwashers (9), and new locknuts
(10).
4.
Position engine (11) with two mounting plates (12) at pivoting tray (13) with holes in mounting plates alined
with holes in isolator mounts (14).
5.
Install four flatwashers (7), capscrews (8), snubbing washers (17), and new locknuts (16) on four isolator
mounts (14) and two mounting plates (12).
a.
INSTALLATION
