TM 9-2330-379-14&P
SERVICE BRAKE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION CRITERIA - CONTINUED
6
Plunger
Inspect plunger seals (7).
seals (7)
If seals are cut, torn, or leaking--
disassemble and overhaul brake actuating
components.
If seals are in good condition, remove pawl
assembly and then remove the adjusting plunger
and its seal to check internal condition.
If grease is contaminated or hardened, or if
parts are dry--disassemble and overhaul brake
actuating components.
If internal parts are satisfactory or over-
hauled, regrease the unit, reassemble the
adjusting plunger, replace the seal using an
appropriate seal driver, reassemble the pawl,
and manually adjust the brake to the proper
specification.
4-109
