TM 9-2330-379-14&P
SERVICE BRAKE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REASSEMBLY - CONTINUED
NOTE
If seal driver is not available, a 1-3/4 inch wrench
socket can be used.
10
Seal driver tool
Seat plunger seal (3) in plunger housing
(1) with correct seal driver tool.
11
Two gaskets (6)
a.
Assemble two gaskets (6) and two
and two guide
guide screws (5) into left side
screws (5)
plunger housing (1). Ensure guide
screw ends enter the plunger
key-way slot so plunger can slide
freely in housing bore.
b.
Tighten guide screws to 15 to 25 lb.
ft. torque.
4-113
