SERVICE BRAKE ASSEMBLY - CONTINUED - TM-9-2330-379-14P

SERVICE BRAKE ASSEMBLY - CONTINUED - TM-9-2330-379-14P_194

SERVICE BRAKE ASSEMBLY - CONTINUED - TM-9-2330-379-14P_196

TM-9-2330-379-14P Trailer Cargo: 1-1/2-Ton 2-Wheel M105A3 NSN 2330-01-452-1218 Manual
Page Navigation
191

TM 9-2330-379-14&P SERVICE BRAKE ASSEMBLY - CONTINUED ACTION LOCATION ITEM REMARKS REASSEMBLY- CONTINUED 15 Brake Brake shoe hold If previously removed, secure brake sho e assembly down clip (2), hold down clips (2) to spider (1) with spider (1) hold down spring hold down spring bolt (3), lockwasher bolt (3), lock- (4) and nut (5). washer (4) and nut (5) WARNING Brake linings contain asbestos fibers. Extreme caution must be observed during handling of asbestos material. 16 Left side Brake shoe rest Apply film of grease to the brake shoe plunger pads, anchor rest pads, anchor (solid) plungers housing (7) (solid) plungers and bolt slots. and bolt slots 17 Right side Adjusting bolts Rotate adjusting bolts (8) to align slots plunger (8), bolt with the brake shoe (6) webs, being housing (7) retainer slot, certain that bolts are not bottomed in and brake adjusting plungers. shoe web (6) 18 Brake shoes (6) Install brake shoes (6). 19 Brake shoe return Attach brake shoe return spring (9) to spring (9) brake shoe assemblies using brake spring pliers. 20 Brake Dust shield (10), Attach dust shield (10) to brake assembly assembly four capscrews spider (1) with four capscrews (11) and spider (1) (11), and four four lockwashers (12). lockwashers (12) 4-116

Privacy Statement
Press Release
Contact