TM 9-2330-379-14&P
SERVICE BRAKE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
NOTE
During disassembly, all parts should be carefully placed on a clean, solid surface
to minimize the possibility of creating airborne dust. Dust should first be cleaned
from the brake drums, dust shields, and brake assemblies using an industrial
type vacuum cleaner equipped with a high efficiency filter system.
NOTE
After vacuum cleaning, any remaining dust should be removed by using a damp rag.
1
Air chamber
Collett nut (2)
Loosen the collet nut (2) using a drift
assembly
or other blunt tool and hammer.
(1)
2
Brake
Brake air chamber
a.
Unscrew the brake air chamber
assembly
assembly (1),
assembly (1) out of the plunger
plunger housing
housing (3).
(3) and wedge
b.
Remove and inspect the wedge
assembly (4)
assembly (4).
4-104
