TM 10-8340-243-13&P
0005
Fabric Wall Assemblies Installation
NOTE
For ease of assembly, liner assemblies may be attached to wall assemblies before these
are attached to the roof cap.
All tent fabric wall assemblies are interchangeable and will attach to any of the four sides of the roof cap.
Decide which walls to use as follows:
1. Use the entrance way wall assembly (Figure 15, Item 1) on the side of the tent which is to be a
personnel entry and exit.
2. Use the plain wall assembly or window wall assemblies (Figure 15, Item 2) on any side that is not an
entrance way. Window wall assemblies should be placed on the side farthest from the stove pipe
opening (Figure 15, Item 3).
3. Do not use a wall assembly on any side that will be complexed to another MCPS. Leave that wall in
the transport bag. The rain gutter assembly is used to join the MCPS together.
3
2
1
END OF TASK
