Entrance Way Set-Up

TM 10-8340-243-13&P

0005

Entrance Way Set-Up

1. Locate the two telescopic poles (Figure 18, Item 1) which pull out and support the corners (Figure

18, Item 2) of the entrance way.

2. Place the bottom pointed end (Figure 18, Item 3) of each pole downward through the pole holders

(Figure 18, Item 4) and grommets (Figure 18, Item 5) on the outside corner of each side of the

entrance way.

3. Extend the height of each pole (Figure 18, Item 1) by pulling the upper portion out. The top and

bottom are placed through the grommets (Figure 18, Item 5) sewn to the corners of the entrance

way. The locking device (Figure 18, Item 6) secures the pole.

4. Pull out the tent lines (Figure 18, Item 7) 120 degrees diagonally and stake them into the ground at a

15 degree angle.

Figure 18. Entrance Way Set-Up.

END OF TASK

0005-18