TM 10-8340-243-13&P
0005
Light Set Installation
WARNING
Install the light set before raising the tent to its full height. This will avoid unsafe working
conditions resulting from attempts to install the lights at full tent height.
CAUTION
To prevent damage, leave lights in a secure location until ready to install.
1. Wrap the hook and pile fastener end of the strap (Figure 12, Item 1) around the light (Figure 12,
Item 2) so that the pile fastener faces away from the fixture. Draw the strap through the "D" ring
2. Repeat for second light (Figure 12, Item 2), ensuring that male and female electrical connectors are
facing each other.
3. Connect the female electrical connector (Figure 12, Item 4) of one light to the male electrical
connector (Figure 12, Item 5) of the other light. (A maximum of 12 lights may be joined.)
4. Leave a male electrical connector (Figure 12, Item 5) available for connection to the power source.
3
1
2
END OF TASK
