TM 10-8340-243-13&P
0005
Unfolding the Frame Legs
1. Choose one of the sides with three legs (Figure 9, Item 1), and lift the frame assembly up at the two
corners and rotate the legs out until they stop.
2. Lock the legs (Figure 9, Item 1) into position by engaging the teeth and turning the handles (Figure
9, Item 2) on the end wall fittings (Figure 9, Item 3) downwards until tight. Repeat this procedure with
the legs on the center wall frame assembly.
3. Repeat this process on the other side.
4. Attach the roof cap liner (Figure 9, Item 4) to the side purlins (Figure 9, Item 5) using the hook and
pile fasteners (Figure 9, Item 6).
2
3
1
4
5
6
