TM 10-8340-243-13&P
0005
2. Locate the roof cap liner (Figure 6, Item 3) and insert it under the ridge poles (Figure 6, Item 4).
Make sure the ridge pole straps are facing the ridge pole.
3. Locate the long slit (Figure 6, Item 5) in the center of the roof cap liner (Figure 6, Item 3). Release
the hook and pile fasteners from the slit, and open the slit.
4. Fit the long slit (Figure 6, Item 5) around the elastic cord (Figure 6, Item 6) supporting the cable
(Figure 6, Item 7).
5. Close the slit (Figure 6, Item 5) around the elastic cord (Figure 6, Item 6), and secure with the hook
and pile fastener. Ensure that the slit is closed over the cable (Figure 6, Item 7) you will not be
able to see the cable when the slit has been closed.
4
3
5
7
6
