3-42
d. Cord Assembly, Removal and Installation
the watertight connector (2) and remove the
(1) Lift the switchbox cover and discon-
cord from the switchbox (6).
nect the cord to be replaced from the terminals.
(3) If the 6-foot cord (4) is to be re-
Refer to the wiring diagram (fig. 3-34).
placed, loosen the 2-screw connector (3) and
remove the cord from the switchbox.
(2) If the 16-foot cord (6, fig. 3-35) or
(4) Install the cord assemblies in reverse
the 27-foot cord (1) is to be replace unscrew
order of removal.
