TM 10-5411-235-13
INSTALLATION OF LMS I SHELTER TO HMMWV
0038 00
MOUNTING SHELTER ON VEHICLE
WARNING
To prevent injury or death to personnel, ensure hooks of
lifting device are inspected and securely attached before
lifting shelter.
Slings and hoists must be properly certified. Use of an
uncertified sling, or a sling which is not currently certified,
may result in equipment damage or severe injury or death to
personnel.
LMS Shelter weighs in excess of 600 pounds. Failure to
follow safety procedures when the shelter is being lifted and
handled can result in sever injury or death.
CAUTION
Do not jerk, bounce, or jar shelter when lifting. Avoid
swinging shelter from side to side. Do not attempt to butt or
push shelter into place with a forklift. If shelter is crated or
palleted, follow the stenciled instructions for forklift
operations.
If shelter panel is punctured during loading or securing,
repair puncture as soon as possible to prevent moisture
from seeping into panels and to restore RFI/EMI shielding.
Carefully watch rear portion of shelter and vehicle to
prevent interference and possible damage.
NOTE
Both the HMMWV and shelter should be laterally and
longitudinally level to aid in proper alignment as shelter is
lowered.
0038 00-11
