TM 10-5411-235-13
INSTALLATION OF LMS I SHELTER TO HMMWV
0038 00
1.
Attach certified sling assembly (1) to all four lifting rings (2) on shelter using the four sling
hooks (3) at opposite end of cables from sling assembly lifting ring (4).
2.
Insert lifting hook (5) of the lifting device into sling assembly lifting ring (4).
3.
Slowly lift the shelter using the lifting device so that the rear isolator mounting screws (6) are
located over their respective holes in the rear mounting bracket (7).
4.
Slowly lower the shelter so that the front isolator mounting holes are located slightly above
the isolators (8) that are positioned on the vehicle beam (9).
0038 00-12
