TM 10-5411-235-13
INSTALLATION OF LMS I SHELTER TO HMMWV
0038 00
2.
In the 3 outermost mounting holes, secure isolator mount washer (1), sleeve spacer (2), isolator
(male portion) (3), and isolator mount washer (4) using screw (5). Insert screws (5) through the
front mounting holes of the vehicle's beam (6) and thread them into mounting kit bar assembly (7)
which is located under the beam. Do not tighten.
3.
In the innermost mounting hole, secure isolator mount washer (1), sleeve spacer (2), and isolator
(male portion) (3) using screw (5). Insert screw (5) through the front mounting hole of the
vehicle's beam (6) and secure using flat washer (8) and nut (9) positioned under the beam.
(There is no isolator mount washer for this innermost mounting hole). Do not tighten.
4.
Repeat for other side of shelter.
0038 00-10
