TM 10-5411-224-14
4-20. DOOR BRACE ASSEMBLY.
This task covers:
a.
Removal
c.
Assembly
b.
Disassembly
d.
Installation
INITIAL SETUP
Tools:
General Mechanics Tool Kit
(Item 1, Appendix B)
Materials/Parts:
Door Brace Assembly
Cotter pin (Item 22, Appendix E)
Lockwashers (Item 20, Appendix E)
Lockwashers (Item 26, Appendix E)
REMOVAL
1. Remove screw (1) and lockwasher (2) securing end of chain and pin assembly (3) to door (4).
2. Remove six screws (5), lockwashers (6), and flat washers (7) securing door stop bracket (8) on door (4).
3. Remove six hex head screws (9) securing door stop angle (10) to shelter.
4. Remove door brace assembly (11) with door stop bracket (8) and door stop angle (10) attached.
DISASSEMBLY
1. Straighten cotter pin leads and remove cotter pin (12) from pin and chain assembly pin (13).
2. Remove pin and chain assembly pin (13) from door stop bracket (8).
3. Remove nut (14), washer (15), and shoulder bolt (16) from door stop angle (10) and remove door brace
assembly (11).
ASSEMBLY
1. Locate door brace assembly (11) on door stop angle (10) and secure in place using shoulder bolt (16),
washer (15) and nut (14).
2. Locate door brace assembly (11) on door stop bracket (8) and secure using pin and chain assembly pin
(13).
4-35
