TM 10-5411-224-14
4-19. ROLLER LATCH ASSEMBLY.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
General Mechanics Tool Kit (Item 1, Appendix B)
Materials/Parts:
Roller Latch Assembly
Lockwasher (Item 25, Appendix E)
REMOVAL
1. Remove four bolts (1), lockwashers (2), roller latch door shim (3) and two roller latch door spacers (4).
2. Remove four bolts (6), lockwashers (7), flat washers (8), roller latch door shim (9) and two roller latch spacers (10).
3. Remove four bolts (12), lockwashers (13), flat washers (14), roller latch door shim (15) and two roller latch spacers
(16).
4. Remove roller latch assembly (18) from door.
INSTALLATION
1. Locate roller latch assembly (18) to door.
NOTE
Do not tighten bolts until all shims are installed.
2. Secure upper three point roller latch (17) to door using four bolts (12), lockwashers (13), flat washers (14), shim (15)
and two spacers (16),
3. Secure handle three point roller latch (5) to door using four bolts (1), lockwashers (2), shim (3) and two spacers (4).
4. Secure lower three point roller latch assembly (11) to door using four bolts (6), lockwashers (7), flat washers (8), shim
(9) and two spacers (10).
5. Tighten bolts and check door closure pressure in accordance with paragraph 4-17.
4-33
